onyx_linkagg – Manage link aggregation groups on Mellanox ONYX network devices

New in version 2.5.

Synopsis

• This module provides declarative management of link aggregation groups on Mellanox ONYX network devices.

Parameters

Parameter	Choices/Defaults	Comments
aggregate -		List of link aggregation definitions.
members - / required		List of members interfaces of the link aggregation group. The value can be single interface or list of interfaces.
mode -	Choices: on active passive Default: yes	Mode of the link aggregation group. A value of on will enable LACP. active configures the link to actively information about the state of the link, or it can be configured in passive mode ie. send link state information only when received them from another link.
name - / required		Name of the link aggregation group.
purge boolean	Choices: no ← yes	Purge link aggregation groups not defined in the aggregate parameter.
state -	Choices: present ← absent up down	State of the link aggregation group.

Examples

- name: configure link aggregation group
  onyx_linkagg:
    name: Po1
    members:
      - Eth1/1
      - Eth1/2

- name: remove configuration
  onyx_linkagg:
    name: Po1
    state: absent

- name: Create aggregate of linkagg definitions
  onyx_linkagg:
    aggregate:
        - { name: Po1, members: [Eth1/1] }
        - { name: Po2, members: [Eth1/2] }

- name: Remove aggregate of linkagg definitions
  onyx_linkagg:
    aggregate:
      - name: Po1
      - name: Po2
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
commands list	always.	The list of configuration mode commands to send to the device Sample: ['interface port-channel 1', 'exit', 'interface ethernet 1/1 channel-group 1 mode on', 'interface ethernet 1/2 channel-group 1 mode on']

Status

• This module is not guaranteed to have a backwards compatible interface. [preview]
• This module is maintained by the Ansible Community. [community]

Authors

• Samer Deeb (@samerd)

Hint

If you notice any issues in this documentation you can edit this document to improve it.